Concrete cutting in Moses Lake WA - straight cuts planned before the saw starts
Need a trench, opening or section cut out of your slab? We mark it with you, cut it clean and catch the mess.
- Fully licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
What does concrete cutting involve, and what sets the price?
Concrete cutting in Moses Lake means sawing straight lines through slabs and floors, cutting openings in walls and drilling round holes through concrete, so you can take out a bad section, run a line underneath or make room for something new. The cutting itself is usually the quick part. Most of the work is planning where the blade goes.
Most people who call me don't want a cut for its own sake. They want a broken stretch out so we can pour a new driveway section, or a trench for a water or power line. The price moves with how thick the concrete is, whether there's rebar in it, which is the steel that holds the slab together once it cracks, how many feet we're cutting, how easy the spot is to reach and whether you want the pieces hauled away. The schedule mostly turns on getting buried lines marked, settling the layout and getting any answer we need from the city. After I've walked it, I put the scope in writing so you can see what you're paying for.
When does a slab need cutting instead of a full tear-out?
One panel sunk or broken
If one square of your driveway or patio has dropped or broken up while the rest sits flat, the dirt under that piece usually settled or washed out. We can saw along its edges and replace just that piece. If you leave it, the broken edges keep catching tires and start cracking the panels next to it.
Water running toward the house
A walk or patio that tips toward your foundation sends every rain and every sprinkler run straight to the wall. Cutting out the bad stretch and repouring it so it falls away from the house usually costs less than dealing with water under the house later.
A line has to go under
When a new water line, drain or power run has to cross under concrete, a saw-cut trench keeps straight edges that patch flat. If someone breaks it out with a hammer instead, the cracks run past the trench and the patch never sits right.
How we handle concrete cutting
Before the saw starts, I mark the cut lines on the concrete with you. We get buried lines located, and we agree on who collects and hauls off the slurry, which is the gray water and ground concrete the blade throws off. Then we set up to catch that slurry right where it comes off the cut so none of it gets washed down the street. The shape and place of the cut decide which saw comes out, and once the cutting's done we either leave the panels in place or break them out, whichever the scope says.
Most of our cutting comes before a pour. We saw out a broken stretch so a new section can tie into the old one, or take out a whole slab ahead of concrete driveway building. On concrete patio construction jobs we often cut back an old step or walk so the new patio meets it cleanly. We also saw control joints into fresh concrete. Those are shallow grooves that tell the slab where to crack, and if they're cut late or skipped, the cracks pick their own path.
Cut and leave the panels
This suits you if you or another crew will break out the concrete, or if the slab is coming out later anyway. Sawing and removal are separate jobs, so leaving the panels keeps the cutting simple.
Cut, break out and haul
This suits a section that's coming out for a new pour, or a trench that has to be open for the plumber. You end up with clean edges and an open hole that's ready for the next step.
Your cut lines, priced in writing
Send us a message and we'll reply within one business day to set up a visit. I come out, walk the job with you and mark the cuts, and the estimate is free, done on site and obligation-free. Afterward you get the scope in writing so you can compare it with other bids.
(509) 512-0637Concrete cutting in Moses Lake and what the city asks
The City of Moses Lake takes building permit applications through its Permit Portal. Its list names remodels, additions and ADUs but doesn't mention concrete cutting, so the list alone doesn't settle whether your cut needs a permit. Before I price a job, I check with the city or county office that covers your property. When a permit is needed, we handle the application or help you with yours, and we work to what that office decides. If you'd rather ask yourself, call Moses Lake Development Services at 509-764-3743.
The city also says dumping materials into its storm system is against the law, and concrete is on its list. That's why we catch the slurry at the cut and never rinse it toward a drain. We set up the same way on jobs in Ephrata and Othello and in the other cities we work in from here.
What happens after you call about concrete cutting in Moses Lake?
Call or send a message
Call (509) 512-0637 or use the form, and tell us what the cut is for. We'll set up a time for me to come out.
I walk and mark it
I walk the job with you, mark out the cuts and talk through your choices and the permit side. Then I send a written estimate with the scope spelled out, so you know what you're paying for and can line it up against other bids.
Get lines located, plan cleanup
Before cutting day, buried lines get located and we settle who catches and hauls the slurry. If the layout changes, we re-mark it with you instead of guessing.
Cut, clean up, walk through
Our own crew makes the cuts and either leaves the panels or hauls them, whichever the estimate says. If we're pouring new concrete in the opening, I run the pour and show you how to care for it while it cures, which is the stretch when it's still gaining strength and needs to be left alone.
Frequently asked questions
How much does concrete cutting cost in Moses Lake?
Across the US, professional saw cutting of easy-to-reach slabs 4 to 6 inches thick usually runs about $4 to $10 per linear foot, and that covers the sawing alone. Reinforced or deeper slabs cost more per foot, and breaking out and hauling the pieces is a separate job. The written estimate after the site visit sets out the scope for your cut.
What is the best saw for cutting a concrete slab or wall?
A flat saw is the usual tool for straight cuts in flat surfaces like floors and patios. A wall saw cuts openings in walls or overhead, and a core drill makes round holes. Very thick concrete or cramped spots call for a wire saw or a hand saw. A flat saw runs slightly past its corners, which is called an overcut, so if that won't work for you, the corners get finished by hand or with a core.
What do I need to mark before a concrete cutting crew arrives?
The cut area has to be approved, and the cut lines and anything set into the concrete have to be marked before cutting starts. The concrete cutting trade's standard puts that on the owner or the contractor who hired the cutter. That same layout settles whether overcuts are okay. When utilities are buried nearby, the owner or hiring contractor also has to call the right agency to locate them before the crew starts. You don't have to do the marking alone, because I mark it out with you at the visit.
Where does concrete cutting slurry go in Moses Lake?
It gets caught at the cut and hauled away, not rinsed into the street, because the city treats concrete in its storm system as illegal dumping. The cutting trade's standard says collecting and disposing of slurry has to be agreed with the owner before work begins, so who handles it goes into your written scope.
How do I avoid hitting cables or rebar when cutting a slab?
For a post-tensioned slab, which has steel cables stretched tight inside it, one scanning firm advises reviewing the drawings and having the slab professionally scanned for cables, rebar and conduit before any drilling, coring or cutting. The same firm says drawings and what you can see on the surface help, but they don't prove the path is clear on their own. We'll talk through whether your slab might be that kind at the walk-through.
Can you cut concrete inside a garage or basement?
Yes, but the choice of saw matters indoors. When indoor walls or slabs are cut with engine-powered saws, the cutting trade's standard calls for ventilation that meets OSHA standards, and electric, hydraulic or pneumatic saws are other options. Ask any crew, including ours, which saw they plan to bring inside.
Moses Lake, WA
Get a written price for your cut
Call (509) 512-0637 or use the form and tell us where the cut is, roughly how many feet it runs and whether the slab has steel in it, so I show up with a good idea of the saw and the cleanup.